You are here
SU3CG2M-180F USB3.0 industrial camera module global shutter 2MP 180FPS high-speed industrial camera recorder
SU3CG2M USB3.0 high-speed industrial camera introduction:
SU3CG2M USB3.0 high-speed industrial cameras, is a can be applied in industrial applications of non-destructive image port USB3.0 high-speed transmission over high-speed camera. Using a high speed camera port USB3.0 speed transmission capability, when the 640 × 480 VGA resolution, can reach transmission speed 1100FPS.
A camera plus a laptop can be composed of a high-speed video systems, high-speed image acquisition and analysis can be achieved with a very low investment. And take advantage of high-speed solid-state hard drive capacity big advantage, high-speed video compression is not a long time. Video not only supports a single video, and also supports long automatic cycle recording, automatically overwrite the oldest files to facilitate real-time recording status line at high speed.
Supporting high-speed video software can not only high-speed real-time acquisition of image data stored in the computer, can also be collected image data, slow-motion playback, the video data can also be converted into common video files such as avi or converted to one by one the bmp picture.
- small volume, only 29mm × 29mm × 30mm
- VGA to 2 megapixel
- up to 1100 / s
- USB3.0 port, plug and play
- opto-isolated external trigger and external synchronization, remote control video
- provide acquisition software, support parameters, video, slow motion, avi video converter and bmp picture conversion functions
- 32-bit and 64-bit Windows system, comprising WinXP / 7/8/10 system
- dll dynamic libraries provide secondary development, it can be called a variety of programming languages, provide VC source code examples.
- Single wire solutions, USB 3.0 while completing data transmission and power supply
- Support firmware upgrade online
applicable C-mount CS-mount lenses
| Resolution | 1920 x 1080 (Full HD resolution) |
| Image size | 2/3 inch |
| Frame rate | 180 fps @ 1920x1080 |
| Window Frame Rate | 512x512@1300fps, 1920x16@5000fps |
| Storage rate | ≤480MBbyts/s |
| interface | USB 3.0 |
| Synchronize | Internal synchronization, external synchronization |
| Shutter Type | Global Exposure |
| Exposure Control | AE, manual setting |
| White balance control | Automatic white balance, manual white balance, a balance key |
| Programmable control | Image size, frame rate, exposure, white balance, mirroring, gain, brightness, contrast, saturation, gamma, camera ID, camera name, etc. |
| Software Features | Parameter settings, recording, playback, format conversion, etc. |
| support system | 32-bit or 64-bit Windows XP / 7/8/10 |
| Secondary development support | Dynamic library supports C, C ++, VB, C #, Labview and Matlab, etc., provide examples of VC source |
| input Output | An opto-isolated trigger input, a flash synchronization output isolation optocoupler |
| power supply | Via USB 3.0 port |
| Power (typical) | 3.5W |
| Lens Mount | C / CS mount |
| size | 29mm × 29mm × 30mm |
| range of working temperature | -20 °C - 50 °C |
| Working humidity | 10% - 90% RH (non-condensing) |
SU3CG Series USB3.0 high-speed industrial camera Mechanical:
